Launching Rem440; Launching Rem440 From Noah4; Launching Rem440 From Otoaccess - Interacoustics Affinity 2.0 Additional Information

2.3 Launching REM440

The REM440 module can be launched and operated under Noah and OtoAccess® databases. It is also
compatible with other patient management systems which have Noah embedded.
Ensure that the Af f inity/Equinox is powered on and connected to your PC bef ore opening the sof tware suite.
If the hardware is not detected, the Af f inity Suite will open but it will run in Simulation mode. This is
identif iable by the below icon in the lef t of the screen. If the unit is connected then the second icon below will
show, indicating a unit is present which it is connected to.
Once the Suite has opened, please click on the tabe titled 'REM' on the right of the screen.
2.3.1

Launching REM440 from Noah4:

If you are using HIMSA's Noah 4, the Af f inity Compact software will install itself automatically in the menu
bar on the start page, along with all the other sof tware modules.
For f urther instructions about working with Noah please see the Noah operation manual.
2.3.2 Launching REM440 from OtoAccess®:
For f urther instructions about working with OtoAccess®, please see the OtoAccess® operation manual.
D-0004576-Q – 2022/05
Affinity/Equinox2.0 – Additional Information
Page 146