Launching The Hit 440 Software; Launching From Otoaccess; Launching Ac440 From Noah - Interacoustics Affinity 2.0 Additional Information

3.4 Launching the HIT 440 software

The HIT440 module can be launched and operated under Noah and OtoAccess® databases. It is also
compatible with other patient management systems which have Noah embedded.
Ensure that the Af f inity Compact is powered on and connected to your PC bef ore opening the sof tware suite.
If the hardware is not detected, the Af f inity Suite will open but it will run in Simulation mode. This is
identif iable by the below icon in the lef t of the screen. If the unit is connected then the second icon below will
show, indicating a unit is present which it is connected to.
Once the Suite has opened, please click on the tabe titled 'HIT' on the right of the screen.
3.4.1 Launching from OtoAccess®
For f urther instructions about working with OtoAccess®, please see the OtoAccess® operation manual.
3.4.2

Launching AC440 from Noah

If you are using HIMSA's Noah 4, the Af f inity Compact software will install itself automatically in the menu
bar on the start page, along with all the other sof tware modules.
For f urther instructions about working with Noah please see the Noah operation manual.
D-0004576-Q – 2022/05
Affinity/Equinox2.0 – Additional Information
Page 274