Print Layout Settings - Interacoustics Affinity 2.0 Additional Information

Note: Bef ore closing the setup remember to tick the Display combined screen check box f or the
combined screen settings to be active.
When a combined screen view is setup, you can click on the Toggle between single and combined
screen button in the f ront screen to view the desired curves together:
If no combined screen view is setup Toggle between single and combined screen will show all
measured curves.
3.8.4

Print layout settings

The HIT440 module allows f or setting up individual print layouts. This is done in the Print Wizard which is
entered using the Print Wizard button (read about the Print Wizard in section 4.1).
D-0004576-Q – 2022/05
Affinity/Equinox2.0 – Additional Information
Page 340