Working With Individual Setups (Test Protocols); Selecting A (Standard) Test Protocol - Interacoustics Affinity 2.0 Additional Information

3.8

Working with individual setups (test protocols)

The HIT440 module is pre-programmed with standard test protocols (IEC and ANSI) ready f or use which can
be selected f rom the f ront screen. However, you may wish to create an individual test protocol
accommodating f or personal pref erences and test methods.
This section describes both how to select a pre-programmed test protocol and how to create an individual
test protocol.
3.8.1

Selecting a (standard) test protocol:

1. Open the Af f inity Suite f rom Noah, OtoAccess®, or stand-alone.
2. Go to the HIT440 by clicking the HIT tab.
3. In the List of Protocols all customized and standard test protocols are listed.
D-0004576-Q – 2022/05
Affinity/Equinox2.0 – Additional Information
Page 310