Managing Multiple Curves - Interacoustics Affinity 2.0 Additional Information

The two curves are now shown
Target
Historical curve
Curve f rom current session
Note: To avoid error through incorrect comparison, only curves of the same type can be compared! This
f unction is embedded into the system so that you do not need to f ocus on this and to prevent comparing
mistakes.

2.5.16 Managing multiple curves

If measuring many curves during the same test session, there are several ways to provide a simpler view or
a comparison view showing only the pref erred curves on the same graph.
2.5.16.1 Curve display options
In the curve display options box, all curves are listed by input level and colour.
If many of the same curve type (e.g., REIGs) have been measured tick only the ones that you wish to
display on the graph.
Un-ticked curves will be hidden ensuring a less conf using screen view.
D-0004576-Q – 2022/05
Page 174
Affinity/Equinox2.0 – Additional Information