Figure 4.6 Connecting The Passive Probe; Figure 4.7 Connecting The Probe Head To The Pa Of The Active Probe - Rigol HDO4000 Series User Manual

Quick Start
After you connect the passive probe, check the probe function and probe
compensation adjustment before making measurements. For details, please refer to
Function Inspection
Connect the Active Probe
Take PVA7250 (active differential probe) as an example.
1. Connect the probe head to the preamp of the active probe, as shown in the figure
below.

Figure 4.7 Connecting the Probe Head to the PA of the Active Probe

2. Connect the other end of the preamp to an analog channel input terminal of the
oscilloscope on the front panel, as shown in the figure below. Note that you need
to push the probe to the due position to lock it firmly.
HDO4000 User Guide
16

Figure 4.6 Connecting the Passive Probe

Probe Compensation
and
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
.