Table of Contents
Advertisement
search condition. For search setup, please refer to
down button to select "Edge" or "Pulse". Click or tap
event or
to go to the last event.
To navigate segments
This mode is available only in UltraAcquire acquisition mode. When UltraAcquire is
enabled, the Mode is automatically set to "Frame Segment" which cannot be
modified.
•
In this mode, you can click or tap the Display mode drop-down button to set
the display mode of segments. For details, please refer to
•
Click or tap Start Frame and End Frame input fields to set the start and end
frames which define the segment range to navigate through. You can also use
the corresponding multipurpose knob to set the start/end frame. After you click
or tap the play/stop key, it plays from the "Start Frame" and the number of
frames that can display on each screen page is (End Frame-Start Frame+1).
For example, if you set the start frame to 3 and the end frame to 9, it will play
from the 3rd frame and displays 7 frames at a page.
•
Click or tap
stop playing through the frames between the Start Frame and End Frame.
During playout, you can click or tap
The playout automatically stops when it reaches the left or right edges. When it
stops, you can click or tap
or tap
page/total pages is indicated in Current Page.
TIP
During segment playing, you are not allowed to change the start/end frame.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
to go to the next search event. Click or tap
in "Navigation" menu or press the front-panel
/
to go to the first page or
Search and Navigation
Search
. Click or tap the Type drop-
to go to the previous search
to go to the first event or
UltraAcquire
to play backward or
to go forward or backward. You can also click
to go to the last page. The current
.
key to start/
to play forward.
HDO4000 User Guide
237
Advertisement
Table of Contents
