Table of Contents
Advertisement
Measurements
Measurement Example
Measure the period of a sine wave by using the manual cursor measurement and
auto measurement respectively. The measurement results are both 800 ns.
Close the Cursor Measurement Result Window
In "Cursors" menu, click or tap Remove to close the cursor measurement result
display window at the right side of the screen.
10.6.2
Track Mode
In the Track mode, you can adjust the two pairs of cursors (Cursor A and Cursor B) to
measure the X and Y values on two different sources respectively. When the cursors
are moved horizontally/vertically, the markers will position on the waveform
automatically. When the waveform is expanded or compressed horizontally/vertically,
the markers will track the points being marked at the last adjustment of the cursors.
In the Cursors menu, click or tap Track for the Mode item to enable the track cursor
measurement function. The measurement results are displayed in the "Result" bar at
the right section of the screen.
HDO4000 User Guide
166
Figure 10.10 Manual Cursor Measurement Example
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Advertisement
Table of Contents
