Table of Contents
Advertisement
reference waveform to the internal memory or external USB storage device. Then
click or tap Save to complete the save operation. For details about the disk
management operation, refer to the
Load
TIP
Only when the reference waveform is saved, can this export function be valid.
This series oscilloscope only supports the flash memory USB storage device of FAT32 format.
For the ".bin" format file, refer to
To Import from Internal or External Memory
You can import the stored reference waveform file from the internal memory or
external USB storage device to the internal instrument and display the file on the
screen.
Click or tap Import to enter the reference waveform file loading interface.
•
Set the Format
In the file loading interface, click or tap the drop-down button of Format to
select ".ref" as the loading format.
•
Set the Load Path
Click or tap the input field of File Path, then the disk management interface is
displayed.
Through the disk management menu, you can load the current reference
waveform to the waveform view of the oscilloscope. Then click or tap Load to
complete the load operation. For details about the disk management operation,
refer to the
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
.
Binary Data Format (.bin)
Disk Management
Disk Management
.
Store and Load
section in
Reference Waveform
Store and
section in
.
HDO4000 User Guide
185
Advertisement
Table of Contents
