Table of Contents
Advertisement
Source
Click or tap the drop-down button for the Source to select CH1, CH2, CH3, or CH4 as
the source. When a source channel is selected, the selected channel automatically
switches to the ON state.
Auto Set
Click or tap AutoSetting to adjust the vertical scale and the offset of the operation
results to the optimal value according to the current configuration for you to better
observe.
Scale
Scale is used to set the vertical scale of the operation result. You can set the vertical
scale in the following ways.
•
In Vertical menu, rotate the corresponding multipurpose knob on the front
panel or click or tap the icon at the right side of the input field of Scale to
increase or decrease the scale value. You can also click or tap the input field to
input a specific value with the displayed numeric keypad.
•
Close the menu and then adjust the vertical scale with the pinch & stretch
gesture on the touch screen. You can also rotate the corresponding
multipurpose knob on the front panel to adjust the vertical scale. Please refer to
Front Panel Overview
Offset
Offset is used to set the vertical offset of the operation result. You can set the vertical
offset in the following ways.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Figure 9.13 Operation Result Display Window
to configure the front-panel multipurpose knobs.
Math Operation
HDO4000 User Guide
145
Advertisement
Table of Contents
