Table 8.1 Video Standard - Rigol HDO4000 Series User Manual

Source Selection
Click or tap Source drop-down button to select CH1-CH4. For details, refer to
Source
. The selected trigger source is indicated in the trigger information label at the
top of the screen.
Only when you select the channel that has signal inputs as the trigger source, can you
obtain a stable trigger.
Video Polarity
In the Polarity item, select the desired polarity: positive polarity (
polarity (
Video Standard
Click or tap the drop-down button of Standard to select the desired video standard.

Table 8.1 Video Standard

Video Standard
NTSC
PAL/SECAM
480p/60Hz
576p/50Hz
720p/60Hz
720p/50Hz
720p/30Hz
720p/25Hz
720p/24Hz
1080p/60Hz
1080p/50Hz
1080p/30Hz
1080p/25Hz
1080p/24Hz
1080i/60Hz
1080i/50Hz
Sync
In the Sync item, select the desired sync type.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
).
Frame Frequency
(Frame)
30
25
60
50
60
50
30
25
24
60
50
30
25
24
60
50
Triggering the Oscilloscope
Scan Type TV Scan Line
Interlaced Scan 525
Interlaced Scan 625
Progressive Scan 525
Progressive Scan 625
Progressive Scan 750
Progressive Scan 750
Progressive Scan 750
Progressive Scan 750
Progressive Scan 750
Progressive Scan 1125
Progressive Scan 1125
Progressive Scan 1125
Progressive Scan 1125
Progressive Scan 1125
Interlaced Scan 1125
Interlaced Scan 1125
Trigger
) or negative
HDO4000 User Guide
81