Voltage Parameters; Figure 10.3 Voltage Parameters - Rigol HDO4000 Series User Manual

Wherein,
Period
7. Phase(r-f): indicates the phase deviation between the threshold middle values of
the rising edge of Source A and the falling edge of Source B. The phase formula is
as follows:
Wherein,
Period
8. Phase(f-f): indicates the phase deviation between the threshold middle values of
the falling edge of Source A and the rising edge of Source B. The phase formula is
as follows:
Wherein,
Period
TIP
• Source A and Source B can be any channel among CH1~CH4 and Math1~Math4.
• The default threshold middle value is 50%.
10.1.4

Voltage Parameters

Vmax
Vmin
1. Vmax: indicates the voltage value from the highest point of the waveform to the
GND.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
PhaseA B
represents Phase(r-r),
R R
represents period of Source A.
sourceA
PhaseA
PhaseA B represents Phase(r-r),
R R
represents period of Source A.
sourceA
PhaseA
PhaseA B
represents Phase(r-r),
R R
represents period of Source A.
sourceA
Overshoot
Vtop
Vpp
Vbase

Figure 10.3 Voltage Parameters

DelayA B
represents Delay(r-r), and
R R
DelayA B
R F
B = × 360
R F
Period
sourceA
DelayA B represents Delay(r-r), and
R R
DelayA B
F R
B = × 360
F R
Period
sourceA
DelayA B
represents Delay(r-r), and
R R
Measurements
°
°
Vupper
Vmid
Vlower
HDO4000 User Guide
153