Count Values - Rigol HDO4000 Series User Manual

Measurements
10.1.2

Count Values

The default values for threshold upper limit and threshold low limit are 90% and 10%,
respectively.
Positive Pulse Count
It is specified as the number of positive pulses that rise from under the threshold
lower limit to above the threshold upper limit.
Negative Pulse Count
It is specified as the number of negative pulses that fall from above the threshold
upper limit to below the threshold lower limit.
Rising Edge Count
It is specified as the number of rising edges that rise from under the threshold lower
limit to above the threshold upper limit.
HDO4000 User Guide
150
1 2
1 2
Positive Pulse Count = n
n
Negative Pulse Count = n
n
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Threshold
Upper Limit
Threshold
Lower Limit
Threshold
Upper Limit
Threshold
Lower Limit