Figure 8.9 Pattern Trigger; Figure 8.10 Pattern Trigger Setting Menu - Rigol HDO4000 Series User Manual

Triggering the Oscilloscope
preset pattern). If no edge is specified, the oscilloscope will trigger on the last edge
that makes the pattern true. If all the channels in the pattern are set to "X", the
oscilloscope will not trigger.

Figure 8.9 Pattern Trigger

Trigger Type
Click or tap the Type drop-down button to select "Pattern".

Figure 8.10 Pattern Trigger Setting Menu

After a trigger type is selected, the current trigger setting information (including
trigger type, trigger source, and trigger level) is displayed in the trigger information
label at the top of the screen, as shown in the figure below. The information will
change based on the trigger settings.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
HDO4000 User Guide
83