Rear Panel Overview; Figure 4.13 Rear Panel - Rigol HDO4000 Series User Manual

12. Probe Compensation Signal Output Terminal/Ground Terminal
This terminal outputs the probe compensation signal which helps you match a
probe's input capacitance to the oscilloscope channel to which it is connected. For
details, please refer to
13. Analog Channel Input Terminals
Attach probes to these connectors for analog signal inputs.
14. USB HOST Port
This series supports the flash memory USB storage device of FAT32 format and
USB-GPIB module.
- USB storage device: imports or exports data (software update, waveform,
setup, or captured image).
- USB-GPIB module: extends the GPIB interface for RIGOL instruments that
integrates the USB HOST interface but not the GPIB interface.
15. Power Switch
Press the switch to power on/off the oscilloscope.
4.4.2

Rear Panel Overview

4
3
2
1
1. AUX OUT
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Probe Compensation
5
13 12
11

Figure 4.13 Rear Panel

.
HDO4000 User Guide
Quick Start
6
7
8
9
10
25