Set the Source of the Waveform Data and the Format of the Saved Waveform
•
Data Source
Click or tap the drop-down button of Data Source to select "Screen" or
"Memory".
•
Waveform Format
Click or tap the drop-down button of Format to select "*.bin" or "*.csv" as the
format of the saved waveform.
Set the file saving parameters
•
Set the filename
Click or tap the input field of File Name to input the file name to be saved with
the pop-up virtual keypad.
•
Set the file path
Click or tap the input field of File Path, then the disk management interface is
displayed. You can click or tap the saved file to view the saved file. For detailed
operations, refer to descriptions in
When a USB device is not connected, the default file path is the "Local Disk";
when a USB device is detected, the path is automatically set to "D:".
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Figure 20.2 Waveform Saving Setting Menu
Disk Management
Store and Load
.
HDO4000 User Guide
245