Table of Contents
Advertisement
Store and Load
Figure 20.6 Disk Management Interface
Execute the following operations through the disk management menu:
Select a Disk
Before using the external storage device, make sure that a USB storage device (FAT32
format, flash memory) is connected correctly.
By default, the "Local Disk(C)" is selected. If an external storage device is inserted,
under the "Disk" menu, two available storage disks can be selected at the upper-left
corner of the "Disk" interface: Local Disk (C) and Removable USB Disk (D). If you select
an external storage device, for example, if you select "Removable USB Disk (D)", the
contents in USB Disk(D) will be displayed.
Create a Folder
Click or tap New Folder, then a folder name input keyboard is displayed.
Parameter Setting Method
For how to use the keypad, refer to descriptions in
. Click or
tap any place on the screen to exit the keyboard.
Clear the Internal Memory Safely
Click or tap SecurityClear, then a prompt message "Execute secure memory wipe?" is
displayed. Click or tap OK to clear all the files stored in the internal disk. Otherwise,
click or tap Cancel to cancel security clear operation.
Select a File
Before operating on the file or folder, first select the desired file or folder.
Click or tap the check box at the right side of the folder, if checked, it is selected, with
an icon
being displayed. Click or tap the check box again or
to deselect it.
The check box restores its original state.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
HDO4000 User Guide
253
Advertisement
Table of Contents
