Table of Contents
Advertisement
4.5.3
Drag
Use one finger to select the object, and then drag the object to a destination place, as
shown in the figure below. With the drag gesture, you can perform the following
operation:
•
Drag the waveform to change its position or scale.
•
Drag the window controls to change the position of the window (e.g. numeric
keypad).
•
Drag the cursor to move the cursor.
•
Drag the trigger cursor to change the trigger level.
•
In multi-window display, drag one of the displayed windows to change its
position on the display.
4.6
Parameter Setting Method
For this instrument, you can use the knobs and touch screen to set parameters. The
common parameter setting methods are as follows:
•
Method 1: Some parameters can be adjusted by rotating the front-panel knobs.
•
Method 2: Click or tap the input field of a specified parameter, then a virtual
keypad is displayed. Complete the parameter setting with the keypad.
Input Chinese and English Characters
When naming a label, this instrument supports Chinese/English input method. The
following part introduces how to input Chinese and English characters with the
Chinese/English input method.
•
Input English Characters
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Figure 4.17 Drag Gesture
Quick Start
HDO4000 User Guide
31
Advertisement
Table of Contents
