Table of Contents
Advertisement
Use
13
Folding down the single-panel foot plate
► Fold down the foot plate and make sure that the support of the foot plate is locked into the receiver (see
fig. 13).
Additional option "lock for single-panel foot plate"
With this additional option, the foot plate can also be locked in the support (see fig. 15).
Proceed as follows to fold the foot plate up and down:
1) Release the lock by pulling on the key ring (see fig. 16). Fold the foot plate up to the side.
2) If necessary, the folded up foot plate can also be swung away to the side (see fig. 14).
3) Fold down the foot plate and make sure that the foot plate lock engages in the receiver (see fig. 15).
15
7.3.3 Adjusting the angle of the elevating leg support
1) Turn the release lever upwards to the stop (see fig. 17).
Alternative: The leg support can also be elevated without operating the release lever.
2) Simultaneously move the leg support to the desired angle.
3) Twist the release lever back down.
→ The leg support automatically snaps into place in the next free position (see fig. 18).
18
14
16
Avantgarde 4
Advertisement
Table of Contents
