Folding Up The Foot Plates; Adjusting The Foot Plate Angle; Adjusting The Knee Angle Of The Leg Support - Otto Bock Discovery Instructions For Use Manual

42
c) Removing/installing the following legrests:
• With single-panel footplate for seating shell interface (steel)
The legrest is mounted on the seating shell interface and may only be removed or installed by the qualified person­
nel.

7.6.2 Folding up the foot plates

The footplates on the following legrests can be folded up to make getting into the product easier.
a) Folding up the footplates on the following legrests:
• Segmented (aluminium/plastic)
• Segmented for short lower leg length (aluminium)
• Elevating with ratchet joint (aluminium)
• Elevating, segmented with calf pad (plastic)
• Elevating, segmented with calf band (plastic)
1) Hold onto the footplate.
2) Fold up the footplate (see fig. 44).
b) Folding up the footplates on the following legrest:
• Single-panel
The single-panel legrest can be optionally equipped with a locking mechanism on one side which prevents the foot­
plate from folding up unintentionally.
1) Pull out the locking mechanism of the footplate by the ring (see fig. 45, item 1).
2) Hold onto the footplate and fold it up (see fig. 45, item 2).
44

7.6.3 Adjusting the foot plate angle

Subsequent adjustments to the footplates may be made only by qualified personnel.

7.6.4 Adjusting the knee angle of the leg support

The knee angle of the following legrests can be adjusted according to the needs of the user.
Discovery
43
45
Use
31