Connection Type: Router-Router Connection - Server Mode - MB Connect Line mbNET.rokey RKH 210 Manual

27.3.1.2 Connection type: Router-router connection - server mode

Select this connection type to connect two complete networks together.
Here you can create a "network to network" connection. Depending on the authentication method, the dialing
party receives an IP from a defined area or each participant specifies his required address.
Example:
LAN
[192.168.9.100] <>ROUTING<> [10.1.0.2]
Server mode
To establish the connection, select = "Wait for incoming connection" from the selection list. The mbNET is
therefore in "server mode" and will be referred to as "server" in the further documentation.
Page 214 von 324 | V 7.2.0 - en | Aug 25
mbNET Client
VPN-TUNNEL
th , 2022 |
mbNET Server
[10.1.0.1] <>ROUTING<> [192.168.0.100]
LAN