Security Settings > Wan Lan (Configuration Of The Firewall Rules) - MB Connect Line mbNET.rokey RKH 210 Manual

26.2 Security Settings > WAN LAN (configuration of the firewall rules)
This setting controls the incoming traffic, i.e. the following settings only apply to incoming traffic from the
outside.
From the point of view of the mbNET Firewall is "WAN" always the currently active interface to the Internet.
Depending on the setting under "Network > Internet" the following rule results:
Internet connection:
• Connect to the Internet via WAN (external router)
Here the WAN Ethernet port is the interface to the Internet. The firewall controls the traffic from the
WAN Ethernet to the LAN Ethernet.
• Connect to the Internet via modem
Here the modem is the interface to the Internet. The firewall controls the data traffic from the modem to
the LAN Ethernet. The entire data traffic on the WAN Ethernet interface will be blocked.
• Connect to the Internet via WAN
here is the "DSL data traffic" over the WAN Ethernet is the interface to the Internet. The firewall con-
trols the traffic from the DSL modem to the LAN Ethernet. The other data traffic on the WAN Ethernet
interface will be blocked.
Click on the green plus
Page 168 von 324 | V 7.2.0 - en | Aug 25
, to add a rule.
th , 2022 |