External Logging (Server Settings) - MB Connect Line mbNET.rokey RKH 210 Manual

23.8.2 External logging (server settings)

Designation
Enable external
logging server
Remote IP Address
Remote Port
We recommend not changing this port, unless you have an application that responds to a completely
different port.
Clicking on "Save" temporarily saves the current entries/changes.
Temporary stored settings/changes are saved until a reboot of the router.
Only after you confirm via "Apply Changes", will the changes be applied (activated) and stored permanently.
Description
Check box for enabling/disabling this function.
When this check box is selected, the system logging of the mbNET is out-
sourced to an external computer.
Enter the IP address of the external logging server here.
Specifies the port number of the extrnal logging server.
Here: Port 514
NO T I C E
But the changes are not yet enabled.
Clicking on "Close" discards the current input/changes.
NO T I CE
System - settings and basic router configuration | Page 95 of 324