MB Connect Line mbNET.rokey RKH 210 Manual page 176

Designation Description
Destination Port Enter the ports to which the data packets are to be forwarded.
Acceptable input: Integer or List of ports (between 0 and 65535) separated with com-
mas or Port range [e.g. 32240-32245] or empty
Ranges must be separated by a hyphen (-) and enumerated by comma (,).
No spaces between the elements to be separated!
The input of IP and port is not mandatory. If neither an IP nor a port is specified, a rule applies only to the
selected interfaces.
Clicking on "Save" temporarily saves the current entries/changes.
Temporary stored settings/changes are saved until a reboot of the router.
Only after you confirm via "Apply Changes", will the changes be applied (activated) and stored permanently.
Image 16: The firewall rule example entry
Page 176 von 324 | V 7.2.0 - en | Aug 25
NO T I CE
NO T I CE
But the changes are not yet enabled.
Clicking on "Close" discards the current input/changes.
NO T I CE
th , 2022 |