Table of Contents
Advertisement
Designation
Description
Active
Check box for enabling/disabling this function.
Enable this feature if you want to use as the mbNET as a VPN client.
Name
Enter a name for the client here.
Host name or IP
Enter the name or IP address used by the client to access the server. Example
123456789@mbNET.mymbnet.biz or 80.187.33.55
Local IP
Option input field
If no address range for remote IPs is registered on the server, you can specify a
freely selectable local IP for the VPN connection.This setting option is used here for
compatibility with other routers.
IP remote terminal Enter the network address of the server in CIDR notation (example: 192.168.0.0/24)
to have a route to the server network.
In the case of a router to router connection the real network address of the server
must be entered here. For client router connections, the field remains empty.
Authentication
Selection field for the authentication protocol:
Encryption
Selection field for the type of encryption:
IMPORTANT: You should always enable encryption of your VPN connections, otherwise unauthorized
access to networks, machines, etc. is possible!
User name
Enter a user name
Password
Enter a new password
Start connection
selction field, when, or under what condition the connection should be started.
for
- Connect immediately
- Connect on Demand
- Start with an active internet connection
- Connect on signal high at Input* 1
- Connect on signal high at Input* 2
- Connect on signal high at Input* 3
- Connect on signal high at Input* 4
Page 200 von 324 | V 7.2.0 - en | Aug 25
• PAP
• CHAP
• MS-CHAP
• MS-CHAP V2
• None
• MPPEV2/40
• MPPEV2/128
• MPPEV2/all
NO T I C E
th
, 2022 |
* refers to digital inputs I1-I4 of the mbNET.
Advertisement
Table of Contents
