Table of Contents
Advertisement
Designation
Description
Selection of in-
Selection field no/yes
puts
Select Yes if you want to call several stations.
Three more lines for entering the necessary access data will appear. Each of these ad-
ditional lines is selected because of signals to digital inputs I2 to I4.
Now enter the numbers and the user data for the PPP dial-up in the additional fields.
Switch the first and one or two of the other three inputs to begin dialling. Please note
that you must first switch one or two of the other 3 inputs before switching the first input.
The mbNET acts only as a PPP client. The PPP server must use a different industrial router (mbNET) or
a computer that can process the request.
Under Network > Internet , set the Internet settings to "On Request" and then switch
the option "Connect if the input is active" to input 1.
• To call the first number => switch input I1
• To call the second number => switch input I2 and then input I1
• To call the third number => switch input I3 and then input I1
• To call the fourth number => switch input I2+I3 and then input I1
Phone number
Here, enter the call/dial-in number of the corresponding provider.
User
Enter the user name required to dial the corresponding provider. Further information
can be obtained directly from your provider.
Password
Enter the password required to dial in to the corresponding provider. Further information
can be obtained directly from your provider.
NO T I C E
Network - connection settings and options | Page 117 of 324
Advertisement
Table of Contents
