Configuring The Plc Connection - MB Connect Line mbNET.rokey RKH 210 Manual

28.1 Configuring the PLC connection

1.
Click the Add button
2.
Designation
Active
Driver
Name
Description
SPS IP address
to add a PLC connection..
Description
Checkbox to enable / disable this connection.
Selected driver (only S7 ISOTCP is available here).
Enter a unique name for this connection.
This field can not contain any spaces or special characters.
Enter a description for this connection.
• When using the MPI/PROFIBUS interface, you must specify the IP address
of the LAN interface of the mbNET here.
• If communication is via Ethernet, enter the IP address of the PLC here.
IO-Manager | Page 245 of 324