Table of Contents
Advertisement
Technical limits
The product is only intended for use within the technical limits specified in the data sheets.
EN/F Safety instructions
• Assembly, installation and commissioning of the router should be carried out only by qualified person-
nel. The respective national safety and accident prevention regulations must be observed.
• The router is built in accordance with the latest technology and all recognised safety rules (see declara-
tion of conformity).
• The router is designed exclusively for use in the control cabinet and with safety extra-low voltage
(SELV) in accordance with DIN EN IEC 62368-1 VDE 0868-1:2021-05.
• The router should only be connected to devices that meet the requirements of IEC / EN 62368-1.
• The router is only intended for use within buildings, not outdoors.
• Never open the router housing. Unauthorized opening and improper repair can be dangerous for users
of the router. The manufacturer is not responsible for unauthorized modifications.
The warranty becomes void if the device is opened!
• The router should not be disposed of with normal domestic waste in accordance with European stan-
dards (WEEE) and the German Electrical and Electronic Equipment Act. The device must be disposed
of accordingly.
ATTENTION! Electrostatic discharge!
Note the necessary precautions when handling electrostatically sensitive components (EN
61340-5-1 and IEC 61340-5-1)!
mbNET routers are maintenance-free units. If an mbNET router is damaged or malfunctions, the device must
be taken out of operation immediately and secured against unintended operation.
The MDH810, MDH815 and MDH830 should only be operated and connected via telephone systems and
not operated directly on the public telephone network.
NO T I CE
Security information | Page 17 of 324
Advertisement
Table of Contents
