MB Connect Line mbNET.rokey RKH 210 Manual page 30

Interfaces
Designation Status
WAN –
green flashes
WAN LED
orange flashes Network traffic active
LAN 1 - 4 –
LAN-LED green flashes
1 – 4
orange flashes Network traffic active
(Dual LED)
USB –
COM –
Button
Designation Description
This button is required if a portal configuration or a firmware is to be transferred to the mbNET via the
Dial out
USB interface.
Reset After pressing the button, the router is restarted (cold start).
Coding switch hexadecimal
Function in preparation.
Key switch with two keys, for switching different functions.
Switch Key color
position
RST red
OFF red / black
ONL red / black
REM red
Page 30 von 324 | V 7.2.0 - en | Aug 25
Description
WAN port on the router (customer network, DSL modem,...)
Network connection available
Local network connection (e.g. machine network)
Network connection available
Connection for USB stick
COM2 port for connecting devices with RS232/RS485, RS422 interface, or depend-
ing on the router type, devices with MPI /PROFIBUS interface.
NO T I CE
LED status Function
"Operation"
red Loading the factory settings
green It is not possible to establish a VPN connection.
Modem devices cannot connect to the Internet.
green It can be established a VPN connection from the mbNET to mbCON-
NECT24.
With modem devices an Internet connection can be established.
= Data Logging
red It can be established a VPN connection from the mbNET to mbCON-
NECT24 including routing to the LAN side of the router.
With modem devices an Internet connection can be established including
routing to the LAN side of the router.
= VPN connection with routes
= Data logging
= Remote Maintenance
th , 2022 |