MB Connect Line mbNET.rokey RKH 210 Manual page 102

Configuring the LAN Interface
Here you can set the LAN IP address and the subnet mask of the router (mbNET). This IP address accesses
the router in the LAN network.
Designation Description
LAN IP address Enter the IP address for accessing the router.
Subnet mask Enter the subnet mask of the network that the router should be integrated into.
Clicking on "Save" temporarily saves the current entries/changes.
Temporary stored settings/changes are saved until a reboot of the router.
Only after you confirm via "Apply Changes", will the changes be applied (activated) and stored permanently.
Page 102 von 324 | V 7.2.0 - en | Aug 25
But the changes are not yet enabled.
NO T I CE
th , 2022 |