System > Settings > Device-Api - MB Connect Line mbNET.rokey RKH 210 Manual

23.3.5 System > Settings > Device-API
The mbNET can be used as an MQTT broker.
Designation
Enable MQTT access
to status topcis
MQTT Password
MQTT Username
Attention: If this function is activated and the settings are saved, port 1883 / TCP is opened for the LAN
interface!
Clicking on "Save" temporarily saves the current entries/changes.
Temporary stored settings/changes are saved until a reboot of the router.
Only after you confirm via "Apply Changes", will the changes be applied (activated) and stored permanently.
Page 68 von 324 | V 7.2.0 - en | Aug 25
Description
Checkbox zum Aktivieren/Deaktivieren dieser Funktion.
Mandatory field for entering a password. No default password is specified here.
The default username "web" cannot be changed.
NO T I CE
But the changes are not yet enabled.
Clicking on "Close" discards the current input/changes.
NO T I CE
th , 2022 |