Serial (Serial Port Com) - MB Connect Line mbNET.rokey RKH 210 Manual

25

Serial (serial port COM)

General
If the IP address of the mbNET is known, the serial interface of the device can be accessed via a dial-up
connection or via the Internet.
The COM serial port can be configured directly via the web interface to RS232, RS485 and RS422 and the
corresponding control commands redirected, e.g. to a connected controller or a connected device.
Depending on the device type, the interface is executed as a MPI/PROFIBUS interface.
Via the MPI/PROFIBUS interface, it is possible to remotely access controllers (e.g. S7-300/400). The MPI/
PROFIBUS interface supports baud rates of up to 12 Mbps.
Image 14: The "Serial" menu depends on the device type and can vary.
Click the Edit icon to edit the corresponding function.
Page 158 von 324 | V 7.2.0 - en | Aug 25 th , 2022 |