MB Connect Line mbNET.rokey RKH 210 Manual page 250

Designation Description
Active Checkbox for activating / deactivating the created datapoint.
Server Selection box with all previously created PLC connections.
Address Enter the tag address for this PLC connection here. For the address syntax of the dri-
ver, see table below.
Display format Selection box for the desired display format (BIN, DEZ, HEX, FLOAT). This format is
used in the status display and in the logging data.
Description Free input field.
Interval [x 100ms] In this interval, this data point is read by the PLC.
Logging If this option is activated, this tag is enabled to be logged. If this option is not activated,
the data point is only displayed on the status display.
DBx.DBXy.z = data block x, data bit y.z, BOOL
DBx.DBBy = data block x, data byte y, BYTE
DBx.DBWy = data block x, data word y, WORD
DBx.DBDy = data block x, data double word y, DWORD
Fy.z = flag bit y.z, BOOL
FBy = flag byte y, BYTE
FWy = flag word y, WORD
FDy = flag double word y, DWORD
Iy.z = input bit y.z, BOOL
IBy = input byte y, BYTE
IWy = input word y, WORD
Table 2: Address syntax for the driver S7_ISOTCP
Image 20: Beispiel-Datenpunkte
To edit a data point, click the edit button
Page 250 von 324 | V 7.2.0 - en | Aug 25
Address syntax for the driver S7_ISOTCP
.
th , 2022 |
IDy = input double word y, DWORD
Oy.z = output bit y.z, BOOL
OBy = output byte y, BYTE
OWy = output word y, WORD
ODy = output double word y, DWORD
PIy.z = peripheral input bit y.z, BOOL
PIBy = peripheral input byte y, BYTE
PIWy = peripheral input word y, WORD
PIDy = peripheral input double word y, DWORD
Ty = Timer y, TIMER
Cy = Counter y, COUNTER