MB Connect Line mbNET.rokey RKH 210 Manual page 204

2 Network settings
Designation
Local IP Address of
the VPN tunnel
Partner IP address of
the VPN tunnel
Replace the sender IP
address of the client
by the LAN IP address
(SNAT)
Click the "Next" button to continue the configuration.
Page 204 von 324 | V 7.2.0 - en | Aug 25
Description
Enter the IP address of the local VPN tunnel endpoint. e.g. 10.1.0.5
Enter the IP address of the partner VPN tunnel endpoint. e.g. 10.1.0.6
Check box for enabling/disabling this function.
All packages in the LAN network receive the sender IP of the mbNET. You can
then actually no longer distinguish in the LAN which sender it is now, but partici-
pants in the LAN must then also NOT have entered the mbNET as a gateway.
th , 2022 |