MB Connect Line mbNET.rokey RKH 210 Manual page 198

Authentication configuration
You can use the following checkboxes to select the authentication protocols (PAP,CHAP,MSCHAP,MSCHAP
V2).
Designation Description
Authentication via Here the Client User Name/Password combination is sent to the host for the neces-
PAP sary time to accept or reject the client authentication.
Authentication us- Here, the authentication is controlled by the host.
ing CHAP If client has dialled in, then it will be prompted for authentication by the host. The
combination of user name and password is then transmitted encrypted by the client
via MD5. If the user data is sent with that of the host computer, then the authentica-
tion is accepted. If not, it will be rejected.
If the authentication is accepted, the user data is constantly checked periodically dur-
ing the connection.
Authentication via Microsoft-developed authentication protocol.
MS-CHAP
Authentication via Microsoft-developed authentication protocol.
MS-CHAP V2
Clicking on "Save" temporarily saves the current entries/changes.
Temporary stored settings/changes are saved until a reboot of the router.
Only after you confirm via "Apply Changes", will the changes be applied (activated) and stored permanently.
Page 198 von 324 | V 7.2.0 - en | Aug 25
But the changes are not yet enabled.
Clicking on "Close" discards the current input/changes.
NO T I CE
th , 2022 |