Table of Contents
Advertisement
6
Warning signs
The following information signs and signal words are used in this document:
Note - indicates a potentially dangerous situation that can lead to property damage if not avoided.
A tip indicates additional information and guidance, for example on cyber security, which facilitates secure
use of the system.
7
Security information
General
• mbNET industrial routers are only used as part of an overall system.
• A machine operator is responsible for compliance with the specific application and regionally applicable
safety and accident prevention guidelines.
• When configuring the application, specific and local safety and accident prevention guidelines must be
observed.
• EN 60204-1 / IEC 204 compliant emergency stop devices must remain effective in all operating modes
of the machine system. There must be no undefined restart of the system.
• Faults that occur in the machinery, which can cause material or personal damage, must be intercept-
ed by additional external devices. These devices must ensure a safe operating state in case of failure.
Such devices include electromechanical safety switches, mechanical interlocks, etc.
• This manual is intended for project engineers, users and installers who use the mbNET Industrial
router. The operation of the mbNET industrial router and the signalling functions should be explained to
users. Installers should be provided with all the necessary data for installation.
• mbNET industrial routers are used only in connection with a complete system. For this reason, the
standards, safety and accident prevention guidelines for each application should be observed by the
project engineer, users and installers. The automation system operator is responsible for complying
with these guidelines.
Intended use
mbNET industrial routers should only be used as described in the manual.
Avoid improper use!
Safety-relevant functions should not be controlled via the mbNET industrial router alone. Uncontrolled restarts
must be completely excluded by programming.
Page 16 von 324 | V 7.2.0 - en | Aug 25
NO T I CE
TI P
th
, 2022 |
Advertisement
Table of Contents
