Status - MB Connect Line mbNET.rokey RKH 210 Manual

28.4 Status

Here, the status of each tag is displayed for all created PLC connections.
Designation Description
Description Display of the description given under "Tags".
Address The address of a tag
Value Displays the tag value in the display format chosen when the tag was created (BIN,
DEZ, HEX, FLOAT).
If the value is invalid or if the data point value can not be read, an error message ap-
pears: "Error - could not read datapoint"
Time stamp Time when the tag was read out.
If the data point is invalid or can not be read, the current device time is displayed
here.
Valid Display whether the data point value is valid / achievable (1) or invalid (0).
IO-Manager | Page 251 of 324