Table of Contents
Advertisement
Devices with hardware version up to HW 04
Countries where used
GSM/GPRS/EDGE
HSxPA
LTE
Transmit output power
Antenna connections
FCC
Installation position/minimum clearances
The router is designed to be mounted on DIN top hat rails (in accordance
with DIN EN 50 022) and for installation in a control cabinet.
The installation and assembly must be carried out according to VDE
0100/IEC 364.
The router may be only mounted vertically as described.
Non-compliance with the minimum distances can destroy the device
at high
ambient temperatures!
North America
850, 1900 MHz; max. 236 kbps
1900 (B2), 850 (B5) MHz; Downlink max. 21 Mbps, Uplink max. 5.76 Mbps
1900 (B2), AWS 1700 (B4), 850 (B5), 700 (B17) MHz; Downlink max. 100 Mbps,
Uplink max. 50 Mbps
Class 4 (2 W, 33 dBm) @ GSM 850 / 900
Class 1 (1 W, 30 dBm) @ GSM 1800 / 1900
Class E2 (0.5 W, 27 dBm) @ EDGE 850 / 900
Class E2 (0.4 W, 26 dBm) @ EDGE 1800 /1900
Class 3 (0.25 W, 24 dBm) @ UMTS
Class 3 (0.2 W, 23 dBm) @ LTE
2 pieces SMA socket
Contains FCC ID: R17LE910NA
NO TI CE
Technical Data | Page 25 of 324
Advertisement
Table of Contents
