Digital Outputs - Configuration - MB Connect Line mbNET.rokey RKH 210 Manual

29.3 Digital outputs - Configuration

NO T I CE
The configuration of output 1 is representative for output 2.
The settings of the selected output are under Output 1 settings.
By clicking on the button "Switch output", the status of the selected output mode is switched (from 0 to 1
or from 1 to 0).
Current status displays the current status (1 or 0) of the individual outputs by means of a LED symbol.
grey LED symbol = Signal level 0 = Output not switched
green LED symbol = Signal level 1 = Output switched
Click the Edit icon , to configure the selected output.
Page 260 von 324 | V 7.2.0 - en | Aug 25 th , 2022 |