Lan Dhcp Server Settings - MB Connect Line mbNET.rokey RKH 210 Manual

24.5.1 LAN DHCP server settings

Designation
DHCP Server active
Start
End
Subnetmask
Broadcast address
Gateway
DNS Server
NetBIOS/WINS-Server
Period of validity [s]
Page 146 von 324 | V 7.2.0 - en | Aug 25
Description
Check box for enabling/disabling this function.
By enabling the function the mbNET can be set up as a DHCP server to the cor-
responding interface.
Enter the start address of the address range managed by the DHCP server.
End address of the range managed by the DHCP server.
Subnet mask of the range managed by the DHCP server.
The broadcast address of the range managed by the DHCP server.
You can optionally enter here the LAN IP address of a router that connects the
clients present on the network to the Internet or another network.
You can optionally enter here the LAN IP address of a DNS server on the net-
work.
The mbNET can also accept both services, DHCP and DNS.
You can optionally enter here the address of an existing NetBIOS/WINS server
on the network.
Enter the time period [in seconds] for how long a client is assigned a specific IP
address by a DHCP server.
th , 2022 |