Release Note - MB Connect Line mbNET.rokey RKH 210 Manual

2

Release note

Version Date
V 6.0.6 Apr 11 th , 2019
V 6.0.8 Jun 19 th , 2019
V 6.1.0 Oct 1 st , 2019
V 6.1.1 Dec 5 th , 2019
V 6.1.2 Mar. 11 th
V 6.1.3 Apr 22 nd , 2020
V 6.1.4 July 6 th , 2020
V 6.2.0 Oct 19 th , 2020
V 6.2 DR01 Mar 17 th , 2021
V 6.3.0 Nov 16 th , 2011
V 6.3.1 Mar 28 th , 2022
Comments
Start-Version
Add connection and termination examples for serial interfaces in RS 485
2- and 4-wire operation. See Chapter:
"Pin assignment serial interfaces COM1/COM2 (front of device)"
Note on "Last error message" when the red Stat LED lights up.
See Chapter: "Front view of the device"
Add the description for the menu "IO-Manager".
See chapter: "IO-Manager"
Note on the function SIMPLY.connect in the chapters
• "General > Validity"
• "Display, controls and connectors" >
The chapter ""Maintenance"" has been added, with the remark to check at
regular in-tervals the actuality of the firmware installed on the device.
As of FW 6.1.1, the mbNET can function both as an NTP client and as an
NTP server. See
, 2020 Correction of the current consumption: old = 1300 mA => new = 500 mA
Add the performance data for new LTE module, for devices with hardware
version HW04.
Add the processor performance data in the technical data.
Add the transmission power of radio modules in the technical data.
General revision
Additions to the menu: Extras > IoT (mbEDGE)
General corrections, update / change of the encryption algorithms.
Revision of the device web interface
Addition of the chapter "Disposal of old devices"
Update of the chapter "Technical Data"; "Scope of Supply"
"System > Settings > NTP Settings"
"Front view of the device"
Release note | Page 11 of 324