Security Settings - MB Connect Line mbNET.rokey RKH 210 Manual

26

Security settings

The mbNET has a built-in firewall to protect against strange or/and unauthorized access/connection attempts.
Incoming and outgoing data traffic is monitored, logged and enabled/disabled via this firewall.
The following submenus are listed under the Security settings menu:
Submenu Description
Firewall General Here you can specify the basic firewall settings.
WAN - LAN This setting is used to regulate the incoming traffic.
LAN - WAN This setting is used to regulate the outgoing traffic.
Forwarding Here you can forward requests from specific IP addresses and ports to redefined IP
addresses and ports.
NAT "SimpleNAT" allows you to grant access to an IP address from the LAN Power Plant
1:1 in the WAN Ethernet network.
Using the "1:1 NAT" Is it possible to connect two networks that are in the same ad-
dress range with each other.
Click the Edit icon , to edit a function or an element.
Click the Add icon to add an item.
Click the Delete icon to delete/remove an item.
Security settings | Page 165 of 324