General Settings - MB Connect Line mbNET.rokey RKH 210 Manual

23.8.1 General Settings

Designation
Set debug output to syslog
Log also to USB-Device
Clicking on "Save" temporarily saves the current entries/changes.
Temporary stored settings/changes are saved until a reboot of the router.
Only after you confirm via "Apply Changes", will the changes be applied (activated) and stored permanently.
Page 94 von 324 | V 7.2.0 - en | Aug 25
Description
Check box for enabling/disabling this function.
If this checkbox is enabled, debug information is output on the logging
server.
Check box for enabling/disabling this function.
If this checkbox is enabled, the logs are also stored on a USB device.
But the changes are not yet enabled.
Clicking on "Close" discards the current input/changes.
NO T I CE
th , 2022 |