MB Connect Line mbNET.rokey RKH 210 Manual page 192

L2TP server -configuration
You can use the L2TP server for VPN-IPSec communication between the mbNET and a Windows client.
Designation Description
Local IP address Enter the name or IP address that the server should have while communicating with
the Windows Client (example: 192.168.0.103).
You can also use an address from the IP range of the LAN interface. You just need to
make sure that this address is not already assigned to another computer in the LAN.
Remote IP Ad-
Here you can find a freely selectable range of IP addresses from the network of the
dress Begin
server. The server assigns IP addresses to the VPN clients from this area. When se-
lecting the IP range, note that client addresses must be in the same network, such as
Remote Address
the above selected "local IP address"
End
Page 192 von 324 | V 7.2.0 - en | Aug 25 th , 2022 |