Description Of Buttons, Icons And Fields - MB Connect Line mbNET.rokey RKH 210 Manual

22.2 Description of buttons, icons and fields

Here, you will find an overview of the display elements, input/selection fields and buttons.
Symbol
Temporary stored settings/changes are saved until a reboot of the router.
Only after you confirm via "Apply Changes", will the changes be applied (activated) and stored permanently.
Display element- greyLED
example: a link is inactive, a cable or USB device is not connected, Output1 is inactive
etc.
Display element- greenLED
example: a link is active, a cable or USB device is connected, Output1 is active etc.
Display element- redLED
example: inactive connection, WAN cable is not plugged in, etc.
Checkbox for enabling/disabling the associated function.
Input field for manual input of information/values.
Selection field/Drop-down list to select a predefined value/parameter.
The Editbutton can be used to change input/values in an element/row.
Button for adding a new element (e.g. a new rule in the security settings or new VPN con-
nection)
An element/row is deleted by clicking the Deletebutton.
Clicking on the "Save" button temporarily saves the current entries/changes. However,
the changes are not active.
Clicking on the "Close" button discards the current input/changes.
N O T I C E
Clicking on the "Save changes" button will apply all stored settings/changes and store
them permanently on the router.
The "Discard changes "button will reset/discard all temporarily stored settings/changes.
Classic router - configuring the mbNET via the web interface | Page 53 of 324
Description