Display, Controls And Connectors; Front View Of The Device - MB Connect Line mbNET.rokey RKH 210 Manual

13

Display, controls and connectors

13.1 Front view of the device

Function / Status LEDs
LED LED
colour status
Fc1 orange flashes
Fc2 orange
flashes
green
flashes
Page 28 von 324 | V 7.2.0 - en | Aug 25
LED Description
• Together with Fc2 if a portal configuration has been detected via the USB in-
terface.
• Together with Fc3 if a firmware has been detected via the USB interface.
off No data traffic on COM2 - incoming
Data traffic on COM2 - incoming
• Together with Fc1 if a portal configuration has been detected via the USB in-
terface.
on For MPI: Bus communication OK
off No data traffic on COM2 - outgoing
Data traffic on COM2 - outgoing
For MPI: Data traffic on the bus
th , 2022 |
1. Function / status LEDs
2. WAN interface
3. LAN interfaces 1 – 4 (4 port switch)
4. USB Host 2.0
5. Dial Out button
6. Reset button
7. Serial interface COM
8. Coding switch hexadecimal (Function in prepa-
ration)
8.a Function / status LEDs for coding switch
9. Key switch
9.a Function / status LEDs for key switch
9.b Key (red) for switch positions
OFF, ONL, RST *, REM
9.c Key (black) for switch positions
OFF, ONL
* The switch position RST has just a tactile function.