Table of Contents
Advertisement
CLOCK ADJUST setting
The sixth tab of the user information mode allows to set
the clock on the display.
Press the button (2) to show the setting frame.
Press the button (1) or (2) to select between hours or min-
utes.
Press the button (3) or (5) to set the correct value of either
hours or minutes.
When the clock has been set, press the button (4) to return
to the user information mode.
If other settings are needed, press the button (3) to scroll
down to the next tab.
Otherwise, press the button (4) to reset the operating
mode of the display.
AUXILIARY HYDRAULICS setting
The seventh tab of the user information mode allows to set
the circuit type and the maximum flow rate of the auxiliary
high-flow hydraulic circuit.
Press the button (2) to show the setting frame.
1. Press the button (3) or (4) and select "ATTACHMENT
TYPE".
2. Press the button (1) or (2) and select " BREAKER" or
"CRUSHER" for attachment type.
3 - CONTROLS AND INSTRUMENTS
3-39
19
ETGE0B-004
20
ETGEOB-005
21
8KYGS8-002
22
AXFRYQ-002
Advertisement
Table of Contents
