Alternator
Check the alternator every 1000 h
WARNING
Improper operation or service of this machine
can result in an accident.
Welding sparks can cause battery gases to ex-
plode. When welding on the machine, always
disconnect the B+ and D+ wires from the alter-
nator. Check the wire markings before recon-
necting to ensure a correct connection.
Failure to comply could result in death or seri-
ous injury.
Ask your CASE CONSTRUCTION Dealer to check
the alternator.
NOTICE: check that the terminal protectors are correctly
installed.
NOTICE: do not use a steam cleaning machine or solvent
to clean the alternator.
Starter motor
Check the starter motor every 1000 h
Ask your CASE CONSTRUCTION Dealer to check the
starter motor.
NOTICE: check that the terminal protectors are correctly
installed.
6 - MAINTENANCE
W0253A
6-58
1
SMIL15CEX9140AA
1
SMIL17CEX0164AA