Case CX130C Operator's Manual page 77

Crawler excavator
Hide thumbs Also See for CX130C:
Table of Contents

Advertisement

1.
Engine coolant temperature gauge.
Displays the temperature of the engine coolant. The
lower zone indicates that the engine coolant temper-
ature is low. When the temperature gauge display
reaches the upper zone, an alarm sounds and the
OVER HEAT message is displayed. Lower the en-
gine speed. If the temperature does not go down,
stop the engine, remove the starter key, and investi-
gate the cause.
2.
Hydraulic oil temperature gauge
Displays the temperature of the hydraulic oil. The
lower zone indicates that the hydraulic oil temper-
ature is low. When the temperature gauge display
reaches the upper zone, an alarm sounds and the
OVER HEAT message is displayed. Lower the en-
gine speed. If the temperature does not go down,
stop the engine, remove the starter key, and investi-
gate the cause.
3.
Fuel gauge
Displays the remaining amount of fuel by the number
of lit segments. When all are lit, it indicates that the
fuel tank is full. When only 1 is lit, an alarm sounds
and the LOW FUEL message is displayed.
NOTE: It is not necessary to wait until the fuel tank
is empty before filling with fuel. If the tank becomes
empty, air bleeding of the fuel system is required.
4.
Work mode icon.
The A work mode is selected.
The H work mode is selected.
The SP work mode is selected.
5.
Travel mode icon.
The slow speed travel mode is selected.
The fast speed travel mode is selected.
6.
Working lights icon.
The working lights are on.
7.
Engine auto idle icon and auto stop icon.
3 - CONTROLS AND INSTRUMENTS
8.
9.
10. Date and time.
11. Auxiliary hydraulics setting. When an option circuit
3-31
Engine auto idle is set.
Engine auto stop is set.
Auto idle and auto stop are both
set.
Anti-theft icon.
The anti-theft protection function is set up.
Attachment selection icon.
is mounted, the selected flow and pressure are dis-
played.
MUC8LU-043Z
Large temporary icon.
A large icon appears temporary in the middle of the
display in order to indicate a specific operating con-
dition
• Wiper speed
1st speed
2nd speed
4

Advertisement

Table of Contents
loading

Table of Contents