Table of Contents
Advertisement
Right counterweight mirror (C)
Install the mirror as shown.
The dimension (L) is 155 mm (6.1 in).
Position the mirror so that the, right-hand side of the ma-
chine is visible.
The tightening torque of the bolts on the mirror is 4.5 –
5.5 N·m (3.3 – 4.1 lb ft)
NOTICE: After you install and position all of the mirrors,
check the visibility around the machine from the operator's
seat. Set the seat into the desired position, and make
sure to confirm all the reference views in the mirrors. If
necessary, fine tune the positioning of the mirrors in order
to ensure proper visibility around the machine.
Rear counterweight mirror (D)
Install the mirror as shown.
The dimension (L) is 160 mm (6.3 in).
Position the mirror so that the rear side of the machine is
visible.
The tightening torque of the bolts on the mirror is 4.5 –
5.5 N·m (3.3 – 4.1 lb ft)
NOTICE: After you install and position all of the mirrors,
check the visibility around the machine from the operator's
seat. Set the seat into the desired position, and make
sure to confirm all the reference views in the mirrors. If
necessary, fine tune the positioning of the mirrors in order
to ensure proper visibility around the machine.
3 - CONTROLS AND INSTRUMENTS
3-54
7
SMIL18CEX3114AA
8
SMIL18CEX3090AA
9
SMIL18CEX3115AA
10
SMIL18CEX3092AA
Advertisement
Table of Contents
